User Tools

Site Tools


using_basic_consume

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
using_basic_consume [2017/10/04 23:12]
billy
using_basic_consume [2020/04/30 18:51] (current)
paul
Line 5: Line 5:
 The use of this is the default for AMQPS connections in <wrap info>​[[replicator_agent_releases|v3.21.0]]</​wrap>​. For versions <wrap info>​[[replicator_agent_releases|v3.18.0]]</​wrap>​ to <wrap info>​[[replicator_agent_releases|v3.20.0]]</​wrap>​ you can manually enter in the setting to utilize this. This change is to add in the following attribute to the <​message_connection>​ tag: The use of this is the default for AMQPS connections in <wrap info>​[[replicator_agent_releases|v3.21.0]]</​wrap>​. For versions <wrap info>​[[replicator_agent_releases|v3.18.0]]</​wrap>​ to <wrap info>​[[replicator_agent_releases|v3.20.0]]</​wrap>​ you can manually enter in the setting to utilize this. This change is to add in the following attribute to the <​message_connection>​ tag:
   * use_basic_consume="​true"​   * use_basic_consume="​true"​
- 
-<WRAP round info> 
-In [[replicator_agent_releases|Argon]],​ the use_basic_consume attribute is set to true by default when installing the agent as it is supported for both AMQPS and HTTPS connections.  ​ 
- 
-Please Note: Basic Consume should always be set to true when using HTTPS connection to maximize throughput and to prevent possible lost of messages. 
-</​WRAP>​ 
  
 Example below: Example below:
using_basic_consume.txt ยท Last modified: 2020/04/30 18:51 by paul